LOW STOCK

Men’s NH300 waterproof hiking shoe in beige

Réf :
8383806
Key feature
Entry-level waterproof! These men's hiking boots are designed to withstand 2 hours of walking in light rain. The rubber sole offers more resistance and grip.
From
£19.99*

2 colors

Users reviews

Write the first review

Post a comment

User benefits

Grip
CrossContact sole for optimum grip on natural terrain.
Cushioning
Open-cell rubber sole
Waterproof
Waterproof, breathable membrane, tested during a 2-hour walk.
Lightweight
408 g per shoe in size 8.

Technical card

Composition
Outer sole of : 100.0% Rubber - Butadiene Rubber (BR) Upper of : 60.0% Polyester (PES) - Recycled, Upper of : 40.0% Polyurethane (PU) Lining and sock of : 100.0% Polyester (PES)
Tests
All our models are tested by users that are representative of our target market under the same conditions as those you will encounter in use. We believe that "real-life" field testing is the only way to continually create and improve the technical performance and design of all our Quechua products.
Designed to
half-day hiking in the countryside, in dry weather, along easy paths. For occasional use.
Guarantee
2 years

Tips

Storage Tips
Store in a dark, dry and well-ventilated place.
Restricted use
Not suitable for mountain hikes.

Features

Waterproofing test
Footwear waterproofing test: these boots, which have been tested in the laboratory and the field, have a breathable, waterproof membrane for optimum protection in the rain. First, the boot is immersed in water while the air pressure inside is increased to check that no bubbles form on the surface. They are half immersed and then placed on a mechanical arm that simulates walking: we then check that the inside of the boot remains perfectly dry.
3 levels of waterproofing
During the waterproofing test, we test 3 levels of waterproofing: 2,000 flexes (around 2 hours of walking), 4,000 flexes (around 4 hours of walking) and 8,000 flexes (around 8 hours of walking). Naturally, after this test or in use, the boot regains its original waterproofing once dry.
Field tests
The comfort of all our shoes is tested when trying them on and in use by typical users under the real-life conditions you will encounter in use. Our Mission Tests bring together the product manager with people who are not affiliated with Quechua to test, develop and approve the products.
Laboratory testing
Other laboratory tests are also conducted to pass the following: tear resistance of the eyelets and straps, resistance of adhesives, toxicology, UV resistance, resistance to abrasion of the outsole and upper components, accelerated ageing.
What shoe size should you choose?
For hiking, don't hesitate to try one size above your usual size for maximum comfort in descents and to prevent your toes from touching the front of the boot. Advice: nails must be cut short, and before descending, check that the laces stop the foot from slipping forward to the front of the boot.
Buying tips
Try on both boots, while standing, with the socks worn for hiking. Try on several models or sizes if necessary. Check the following two comfort points: the base of the heel and the front part of the foot going downhill. There should be no pressure points when you try them on. Feel free to walk around the store. Gradually wear in your shoes over the course of a few hikes so that they conform to your feet.
HAUT DE PAGE