Men's Rain-cut Rain Waterproof Hiking Over-trousers - Black
These simple, compact and waterproof hiking overtrousers can easily be slipped into the bottom of your bag with your waterproof jacket to protect you from showers!
Waterproof coating (2 000 mm). Fully taped seams.
Hydrophilic coating (RET=12): limits condensation inside the garment.
Light and compact garment for the bottom of your bagYou will take it everywhere!
Main fabric : 100.0% Polyester (PES)
Our design team is based at the foot of Mont-Blanc, in Haute-Savoie (France). All year round, we create and develop products that are beautiful, simple and technologically advanced. These are then ruthlessly tested in the field, as we remain convinced that only through rigorous testing under real world conditions, like the ones you will be using them in, can we continue to provide you with better products than ever.
lowland hikers who need a spare jacket that provides protection from the rain.
Always make sure that this waterproof protective garment is completely dry before storing it.
This garment has been shower-tested using 60 litres of water/sqm/hour for 2 hours. This test reproduces the average conditions of a rain shower in the mountains.
Easy to put on
Zipped ankles for easy dressing without having to take off your shoes.May not be suitable if boots are very big.
Waist size adjustment
Elastic + drawcord.
Sizing and fit information
Wide cut. Shortening the length is not possible due to hem zips.
We measure a fabric's resistance to water pressure, expressed as a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. A waterproof rating of 2000 mm means that the fabric can withstand the pressure exerted by 2000 mm of water (the equivalent of nearly a two hour downpour).
Additional recommended products
Care products: waterproofing spray or liquid in the machine To renew the fabric's water repellent properties and optimise performance throughout the lifespan of your garment.
Water repellence of the component (different from waterproofing)
A fabric is water repellent when it allows water slide over its surface without seeping in. This prevents the fabric from swelling, and keeps it lightweight, breathable and warm. The fabric is made water repellent by treating its outer surface. This treatment must be renewed throughout the garment's lifetime (recommended after every three washes).
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity evaporates, and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric / 9<RET<12 = very breathable fabric / 12<RET<20 = breathable fabric / RET>20 = little or no breathability.
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.